VW T5 Awning Rail – Hightop Roof
VW VOLKSWAGEN TRANSPORTER T5 both SWB and LWB
ONE PIECE AWNING RAIL MADE BESPOKE TO YOUR REQUIREMENTS
SUITABLE FOR HIGHTOPS, MEDIUM ROOFED VANS etc.
Normally for a High Top, a SWB rail will be 260 cm and a LWB rail will be 280 cm. If you require a different length please specify.
Why a Camper Essentials Rail?
At last, the perfect alternative to the very expensive VW or Reimo alternatives. This rail actually has advantages over these other two products other than the price in that it is so discreet at just 12mm x 12mm in profile. This is proving to be very popular with many of my customers. This rail is a single piece of aluminium rail which is discreet and smart looking with chamfered ends to stop your awning being snagged. It is also in another league to some other options you may see which come in two sections or worse still which are just a J shaped piece of metal relying solely on getting the right tension on the Figure of 8 sections and actually on a hightop or medium roofed van won’t work well with the angles required. Not only are they charging not much less for a completely unfinished rough, square ended rail, the Figure of 8s will come un-clipped on those other rails if it gets a bit windy… Not a problem with a Camper Essentials Rail as the beading on a sun canopy can be fed straight in, as can an awning if you don’t want to drive away or if intending to drive away, simply use the Kador Bead and Figure of 8 for the ultimate attachment that won’t come off even in stronger winds!
This rail is a far better option than messing around with suction cups and metal rods, clamp and pole systems or any other method with the risk of it blowing off and damaging your van or messing around with ropes and tying your awning over the top of your van and risking the ropes rubbing and scuffing your paintwork. Here you have an alternative to the expense of Reimo, but with the same practicality and a discreet yet smart look, which will undoubtedly add value to your van!
How and where to fit.
“Whilst fitting is pretty easy, if you’d prefer me to do it for you, I can offer a fitting service – please call 07900 600886 to discuss.”
The Camper Essentials rail you’re buying is supplied as a self fitting kit with full comprehensive instructions (and free personal expert telephone advice if needed), sealant, latex gloves, alcohol wipes, masking tape and stainless steel screws. It will go on high top vans, vans even those made of fibreglass. Could also be used to fix a draught skirt to the bottom of your van or inside the tailgate or across the back of the van for a sun shade. Whilst fitting is pretty easy, if you’d prefer me to do it for you, I can offer a fitting service – please call 07900600886 to discuss.
How to use to attach an awning or sun canopy
Once fitted, this rail is super quick and easy to use. Using a Kador awning bead strip which feeds into the Figure of 8 and the Awning Rail attaches the two together in the most reliable and weatherproof way within a minute or two. I can supply Figure of 8 sections and Kador awning bead at an additional cost if your awning was not supplied with them and will not charge any extra for postage.
Plus £16.99 Postage and Packing for a Courier Service. This may be more expensive than some competitors but they cut the rail in half in order to get cheaper postage. This leaves you with a rail which is not nearly as good. I actually make a loss on the postage but believe it is essential that you have the best rail possible.
3m of Kador Awning Bead – £19.99 plus Free P&P when ordered with a rail.
760mm Figure of 8 – £4.50 each plus Free P&P when ordered with a rail.
I have sold several hundred of these during last few seasons and this which have proved to be very popular and the feedback I have received has all been very positive including the ease of fitting and the comprehensiveness of the instructions – please look at my feedback! It is a system that works extremely well – has no problems with water ingress or anything like that and gives the best attachment – well finished and engineered and the possibility of bespoke service.
I can also make them to fit at the bottom of the van to fit a draft skirt or across the rear of the van if you wanted a Sun Canopy off the rear doors. Anything is possible.
If you would like your rail fitting or would like to collect it personally, I am located near Totnes, Devon.
Because these rails are made to order please allow a few days for for them to be made and delivered to you, however I aim to get them out as quickly as possible, however in peak periods this may be slightly longer.
Please specify at the time of ordering what vehicle it is for and whether you require a LWB or SWB rail and specify the length required and also supply a contact phone number for the courier. Failure to do so will delay your order.
HAVE A T5 WITH GUTTER STILL AVAILABLE AND DO NOT WANT TO DRILL IT?
I ALSO HAVE ANOTHER ONE PIECE RAIL AVAILABLE FOR THE VW T5 TRANSPORTER WHICH FIXES IN THE GUTTER CHANNEL AND IS BOLTED ON USING THE EXITING BOLT HOLES, BUT IS SUPPLIED WITH REPLACEMENT STAINLESS STEEL BOLTS AND RUBBER WASHERS. THIS SIMPLY BOLTS ON AND OFF IN A MATTER OF MINUTES IF YOU DO NOT WISH TO DRILL HOLES IN YOUR VAN OR WANT FLEXIBILITY FOR CHANGING THE RAIL FOR ROOF BARS. THIS CAN ALSO BE MODIFIED TO WORK IN CONJUNCTION WITH A ROOF RACK OR RAILS FOR A SMALL ADDITIONAL FEE.